A case of no-wind plinian fallout at Pululagua caldera (Ecuador): implications for models of clast dispersal

The caldera of Pululagua is an eruptive centre of the Northern Volcanic Zone of the South American volcanic arc, located about 15 km north of Quito, Ecuador. Activity leading to formation of the caldera occurred about 2450 b.p. as a series of volcanic episodes during which an estimated 5–6 km³ (DRE) of hornblende-bearing dacitic magma was erupted. A basal pumice-fall deposit covers more than 2.2x10⁴ km² with a volume of about 1.1 km³ and represents the principal and best-preserved plinian layer. Circular patterns of isopachs and pumice, lithic and Md isopleths of the Basal Fallout (BF) around the caldera indicate emplacement in wind-free conditions. Absence of wind is confirmed by an ubiquitous, normally graded, thin ash bed at the top of the lapilli layer which originated from slow settling of fines after cessation of the plinian column (co-plinian ash). The unusual atmospheric conditions during deposition make the BF deposit particularly suitable for the application and evaluation of pyroclast dispersal models. Application of the Carey and Sparks' (1986) model shows that whereas the 3.2-, 1.6-, and 0.8-cm lithic isopleths predict a model column height of about 36 km, the 6.4-cm isopleth yields and estimate of only 21 km. The 4.9- and 6.4-cm isopleths yield a column height of 28 km using the model of Wilson and Walker (1987). The two models give the same mass discharge rate of 2x10⁸ kg s^-1. A simple exponential decrease of thickness with distance, as proposed by Pyle (1989) for plinian falls, fits well with the BF. Exponential decrease of size with distance is followed by clasts less than about 3 cm, suggesting, in agreement with Wilson and Walker (1987), that only a small proportion of large clasts reach the top of the column. Variations with distance in clast distribution patterns imply that, in order to obtain column heights by clast dispersal models, the distribution should be known from both proximal and distal zones. Knowledge of only a few isopleths, irrespective of their distance from the vent, is not sufficient as seemed justified by the method of Pyle (1989).     

The 1631 Vesuvius eruption. A reconstruction based on historical and stratigraphical data

The eruption of 1631 A.D. was the most violent and destructive event in the recent history of Vesuvius. More than fifty primary documents, written in either Italian or Latin, were critically examined, with preference given to the authors who eyewitnessed volcanic phenomena. The eruption started at 7 a.m. on December 16 with the formation of an eruptive column and was followed by block and lapilli fallout east and northeast of the volcano until 6 p.m. of the same day. At 10 a.m. on December 17, several nuées ardentes were observed to issue from the central crater, rapidly descending the flanks of the cone and devastating the villages at the foot of Vesuvius. In the night between the 16th and 17th and on the afternoon of the 17th, extensive lahars and floods, resulting from rainstorms, struck the radial valleys of the volcano as well as the plain north and northeast.Deposits of the eruption were identified in about 70 localities on top of an ubiquitous paleosol formed during a long preeruptive volcanic quiescence. The main tephra unit consists of a plinian fallout composed of moderately vesicular dark green lapilli, crystals and lithics. Isopachs of the fallout are elongated eastwards and permit a conservative volume calculation of 0.07 km³. The peak mass flux deduced from clast dispersal models is estimated in the range 3–6 × 10⁷ kg/s, corresponding to a column height of 17–21 km. East of the volcano the plinian fallout is overlain by ash-rich low-grade ignimbrite, surges, phreatomagmatic ashes and mud flows. Ash flows occur in paleovalleys around the cone of Vesuvius but are lacking on the Somma side, suggesting that pyroclastic flows had not enough energy to overpass the caldera wall of Mt. Somma. Deposits are generally unconsolidated, massive with virtually no ground layer and occasionally bearing sparse rests of charred vegetation. Past interpretations of the products emitted on the morning of December 17 as lava flows are inconsistent with both field observations and historical data. Features of the final phreatomagmatic ashes are suggestive of alternating episodes of wet ash fallout and rainfalls. Lahars interfingered with primary ash fallout confirm episodes of massive remobilization of loose tephra by heavy rainfalls during the final stage of the eruption.Chemical analyses of scoria clasts suggest tapping of magma from a compositionally zoned reservoir. Leucite-bearing, tephritic-phonolite (SiO₂ 51.17%) erupted in the early plinian phase was in fact followed by darker and slightly more mafic magma richer in crystals (SiO₂ 49.36%). During the nuées ardentes phase the composition returned to that of the early phase of the eruption.The reconstruction of the 1631 eruptive scenario supplies new perspectives on the hazards related to plinian eruptions of Vesuvius.     

NOAA AR 8210: EVOLUTION AND FLARES FROM MULTIBAND DIAGNOSTICS

NOAA 8210 has been a region showing a remarkable level of activity well before solar maximum. Dominated by a large, rapidly rotating spot, it produced several intense flares during its disk passage at the end of April–beginning of May 1998. We examine the development of AR 8210 in H and white light (WL) and study the evolution of its complex magnetic topology. While the other principal flares are briefly reviewed, the great X1.1/3B flare of 2 May, which was observed at Kanzelhöhe Solar Observatory during a SOHO/UVCS ground support campaign, is studied in detail. This event has been documented in full-disk H and Na-D intensitygrams, Dopplergrams, and magnetograms, with a time cadence of one minute each. The flare was associated with a CME and produced significant geomagnetic effects. Furthermore, we point out the perspectives for our planned Flare Monitoring and Alerting System, since the two new instruments (Magneto-Optical Filter and Digital H camera), which made their first operational run with the campaign, are crucial components for this program.     

Low reproductive success for copepods during a bloom of the non‐aldehyde‐producing diatom Cerataulina pelagica in the North Adriatic Sea

Egg production rates and/or hatching success in the copepods Acartia clausi, Calanus helgolandicus and Temora longicornis were negatively affected by a late spring (May–June 2003) phytoplankton bloom in the North Adriatic Sea, dominated mainly by the large diatom Cerataulina pelagica. Highest total concentrations of 3.3·10⁴ cells·ml^?1 were located in the vicinity of the Po River, which also corresponded to the area where the highest numbers of phaeophorbides were measured (0.779, 0.528 and 0.419 μg·l^?1, respectively, compared to an average of the remaining stations of 0.183 ± 0.049 SD), suggesting some grazing on the bloom. Phytoplankton biomass in terms of carbon was dominated by diatoms, representing on average 42% of total phytoplankton carbon and more than 80% at several stations. Cerataulina pelagica, Cyclotella spp., Chaetoceros spp. and small unidentified centric diatoms dominated the diatom community numerically but C. pelagica was by far the dominant diatom in terms of carbon due to its large cell size. This species represented more than 60% of the diatom biomass at nine of the 14 stations sampled, and was absent only at one station, which was the most offshore station sampled during the cruise. Although polyunsaturated aldehydes (PUAs) were not detected, other oxylipins which are hydroxy and keto derivatives of eicosapentaenoic and docosahexaenoic acids that affect copepod reproduction were found in these samples. Hence, we can attribute the negative impact of diatoms not only to PUAs, as previously believed, but also to these compounds. This is the first direct evidence of the presence of oxylipins other than PUAs in marine blooms dominated by diatoms.     

Depth profiles of bacterioplankton assemblages and their activities in the Ross Sea

The identification of bacterial community structure has led, since the beginning of the 1990s, to the idea that bacterioplankton populations are stratified in the water column and that diverse lineages with mostly unknown phenotypes dominate marine microbial communities. The diversity of depth-related assemblages is also reflected in their patterns of activities, as bacteria affiliated to different groups can express different activities in a given ecosystem. We analysed bacterial assemblages (DGGE fingerprinting) and their activities (prokaryotic carbon production, protease, phosphatase, chitinase, beta-glucosidase and lipase activities) in two areas in the Ross Sea, differing mainly in their productivity regime: two stations are located in the Terra Nova Bay polynya area (highly productive during summer) and two close to Cape Adare (low phytoplankton biomass and activity). At every station a pronounced stratification of bacterial assemblages was identified, highlighting epipelagic communities differing substantially from the mesopelagic and the bathypelagic communities. Multivariate analysis suggested that pressure and indirectly light-affected variables (i.e. oxygen and fluorescence) had a great effect on the bacterial communities outcompeting the possible influences of temperature and dissolved organic carbon concentration. Generally activities decreased with depth even though a signal of the Circumpolar Deep Water (CDW) at one of the northern stations corresponded to an increase in some of the degradative activities, generating some ‘hot spots’ in the profile. We also found that similar assemblages express similar metabolic requirements reflected in analogous patterns of activity (similar degradative potential and leucine uptake rate). Furthermore, the presence of eukaryotic chloroplasts’ 16S rDNA in deep samples highlighted how in some cases the dense surface-water formation (in this case High Salinity Shelf Water—HSSW) and downwelling can affect, at least for some phylotypes, the bacterial (16S rDNA based) community structure of the dark ocean.     

85 Peg A: what age for a low-metallicity solar-like star?

We explore the possible evolutionary status of the primary component of the binary 85 Pegasi, listed as a target for asteroseismic observations by the MOST satellite. In spite of the assessed 'subdwarf' status, and of the accurate distance determination from the Hipparcos data, the uncertainties in the metallicity and age, coupled with the uncertainty in the theoretical models, lead to a range of predictions on the oscillation frequency spectrum. Nevertheless, the determination of the ratio between the small separation in frequency modes, and the large separation as suggested by Roxburgh, provides a very good measure of the star age, quite independent of the metallicity in the assumed uncertainty range. In this range, the constraint on the dynamical mass and the further constraint provided by the assumption that the maximum age is 14 Gyr limits the mass of 85 Peg A to the range from 0.75 to  0.82 M_⊙  . This difference of a few hundredths of a solar mass leads to well detectable differences both in the evolutionary stage (age) and in the asteroseismic properties. We show that the age determination which will be possible through the asteroseismic measurements for this star is independent either of the convection model adopted or the microscopic metal diffusion. The latter conclusion is strengthened by the fact that, although metal diffusion is still described in an approximate way, recent observations suggest that real stars suffer a smaller metal sedimentation compared with the models.     

Fundamental physics and absolute positioning metrology with the MAGIA lunar orbiter

MAGIA is a mission approved by the Italian Space Agency (ASI) for Phase A study. Using a single large-diameter laser retroreflector, a large laser retroreflector array and an atomic clock onboard MAGIA we propose to perform several fundamental physics and absolute positioning metrology experiments: VESPUCCI, an improved test of the gravitational redshift in the Earth?CMoon system predicted by General Relativity; MoonLIGHT-P, a precursor test of a second generation Lunar Laser Ranging (LLR) payload for precision gravity and lunar science measurements under development for NASA, ASI and robotic missions of the proposed International Lunar Network (ILN); Selenocenter (the center of mass of the Moon), the determination of the position of the Moon center of mass with respect to the International Terrestrial Reference Frame/System (ITRF/ITRS); this will be compared to the one from Apollo and Lunokhod retroreflectors on the surface; MapRef, the absolute referencing of MAGIA??s lunar altimetry, gravity and geochemical maps with respect to the ITRF/ITRS. The absolute positioning of MAGIA will be achieved thanks to: (1) the laboratory characterization of the retroreflector performance at INFN-LNF; (2) the precision tracking by the International Laser Ranging Service (ILRS), which gives two fundamental contributions to the ITRF/ITRS, i.e. the metrological definition of the geocenter (the Earth center of mass) and of the scale of length; (3) the radio science and accelerometer payloads; (4) support by the ASI Space Geodesy Center in Matera, Italy. Future ILN geodetic nodes equipped with MoonLIGHT and the Apollo/Lunokhod retroreflectors will become the first realization of the International Moon Reference Frame (IMRF), the lunar analog of the ITRF.     

Comparison of four meteorite penetration funnels in the Campo del Cielo crater field,Argentina

Abstract– More craters may be discovered in the future, but as it is currently known, the Campo del Cielo crater field is 18 km long by 4 km at its widest point. Such a distribution of craters suggests that the parent meteoroid entered and traversed the atmosphere at a very low angle relative to horizontal. The crater field contains at least 20 small craters produced by the larger fragments of the parent meteoroid. Four of these are explosion analog craters and the rest are penetration funnels. During four field seasons, we have constructed topographic and magnetic maps of four of the penetration funnels as found, and then dug trenches across them to learn their original structures and recover meteorites preserved within them. Structures of these penetration funnels indicate very low angles of impact, i.e., 9–16° relative to horizontal. This supports the idea that the parent meteoroid traversed the atmosphere at a low angle. Data given here for the four penetration funnels include projectile masses, lengths, widths, depths, and estimates of impact angles and azimuths. One of the penetration funnels described here (No. 6) can almost be classified as an explosion analog crater.     

Assessment of the role of facies heterogeneity at the fine scale by numerical transport experiments and connectivity indicators

The heterogeneity of facies at the scale of individual lithological levels controls, at a macroscopic scale, water flow and contaminant transport in porous sediments. In particular the presence of organized features such as permeable connected levels, has a significant effect on travel times and dispersion. Here, the effects of facies heterogeneity on flow and transport are studied for three blocks, whose volume is of the order of a cubic meter, dug from alluvial sediments from the Ticino valley (Italy). Using the results of numerical tracer experiments on these domains, the longitudinal dispersion coefficient is computed with an Eulerian approach based on the fit of the breakthrough curves with the analytical solution of the convective-dispersive transport equation. Moreover, the dispersion tensor is computed with a Lagrangian approach from the second order moments of particle distributions. Three types of connectivity indicators are tested: (1) connectivity function; (2) flow, transport and statistical connectivity; (3) original (intrinsic, normal and total) indicators of facies connectivity. The connectivity function provides the most complete information. Some of the transport and statistical connectivity indicators are correlated with dispersivity. The simultaneous analysis of the three indicators of facies connectivity emphasizes the fundamental geometrical features that control transport.     

Experimental investigation of the hydrodynamics in pockmarks using particle tracking velocimetry

Water tank experiments were performed in order to investigate the behaviour of currents in pockmarks. A particle-seeded flow was visualised and quantified with the aid of the particle tracking velocimetry technique. The employed analogue pockmark is a 1:100 idealised scale model of a natural pockmark, while the highest Reynolds number in the experiments was one order of magnitude smaller than in nature. Interaction of the flow with the pockmark geometry resulted in an upwelling current downstream of the pockmark centre, along with enhanced water turbulence in the depression. Scaling-up the experimental measurements, it is found that the upwelling would be capable of preventing the settling of particles as large as very fine sand. Furthermore, the increased turbulence would support the suspended fine material, which can thus be transported away before settling. The net effect for a variable-direction near-bed current over long periods of time would be to winnow the settling sediments and reduce the sedimentation rate in pockmarks. These mechanisms may be responsible for the observed lack of sediment infill and the typical presence of relatively coarser sediments inside pockmarks compared to the surrounding bed. In contrast, sediments transported as bedload are likely to be deposited in pockmarks because of the weakening of near-bed currents as well as lateral flow convergence associated with the upwelling. Bedload, however, may not be the dominant mode of sediment transport in areas covered by cohesive sediments, where pockmarks are found.